-
- Front Suspension Removed
-
- Lowering Engine
-
- Lifting Body
-
- Engine Out
-
- Gearbox Separated
-
- Ramp In To New Shed
-
- Bonnet 1
-
- Bonnet 2
-
- N/S Boot Well
-
- N/S Front Wing
-
- N/S Rear Corner
-
- N/S Rear Corner 2
-
- N/S Rear Light
-
- N/S Rear Wing
-
- N/S Rear Wing/Cill
-
- N/S Rear Inner Wing From Boot
-
- N/S Rear Inside Wing Bottom
-
- N/S Rear Inside Wing Top
-
- N/S Rear Wing
-
- N/S Rear Wing Vent
-
- O/S Boot Well
-
- Tow Bar Cutout
-
- Tow Bar Mounting Hole
-
- N/S Rear Jacking Point
-
- Disconnecting Engine
-
- Stripping Engine Bay
-
- Stripping Interior 1
-
- Stripping Interior 2
-
- Might Need A new Tyre
Servo Removal
-
- Linkage
-
- Brake Pipes
-
- Servo Removed
- Pump brake pedal until it goes hard
- Remove spring clip from bottom of linkage pin and remove pin
- Remove split-pin and spring
- Syphon out brake fluid from master cylinder reservoir
- Disconnect brake lines from master cylinder
- Disconnect hydraulic pipes from servo
- Remove 4 bolts holding servo in place (loose nuts on back)
- Remove servo & master cylinder
- Place servo in a vice and remove the two bolts holding the master cylinder to the servo
Recent Comments